{"product_id":"classic-mini-mk2-mk3-led-rear-light-conversion-kit-1967-75-clubman-roundnose","title":"Classic Mini Mk2 Mk3 LED Rear Light Conversion Kit 1967-75 Clubman Roundnose","description":"\u003ch2\u003eClassic Mini Mk2\/Mk3 LED Rear Light Conversion Kit – 1967–1975\u003c\/h2\u003e\n\u003cp\u003eUpgrade the rear lighting on your Classic Mini while retaining the original appearance of the factory rear lamp units.\u003c\/p\u003e\n\u003cp\u003eThis IPNG Automotive LED rear light conversion kit is designed for \u003cstrong\u003eMk2 and Mk3 Classic Mini saloons produced from 1967–1975\u003c\/strong\u003e, including both \u003cstrong\u003eRoundnose and Clubman models fitted with the earlier rear light units without reverse lights\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis conversion replaces the original bulb contacts with bright LED boards while retaining the original lamp housings and lenses. Once installed, the exterior appearance remains original.\u003c\/p\u003e\n\u003cp\u003eThe low mounting position of the original Mini rear lights can make them less noticeable in modern traffic. These high-output LEDs provide a much brighter and more immediate light output, helping your Mini remain clearly visible while preserving the period look.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLED conversion for Classic Mini Mk2 and Mk3 rear light units\u003c\/li\u003e\n\u003cli\u003eFits Roundnose and Clubman saloons from \u003cstrong\u003e1967–1975\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuitable for rear lamp units \u003cstrong\u003ewithout reverse lights\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndicator, brake and tail light functions\u003c\/strong\u003e operate as per the original units\u003c\/li\u003e\n\u003cli\u003eBright LED output improves rear visibility\u003c\/li\u003e\n\u003cli\u003eRetains the original rear lamp housings and lenses\u003c\/li\u003e\n\u003cli\u003eLooks original once installed\u003c\/li\u003e\n\u003cli\u003eFitted with \u003cstrong\u003eLucas connectors\u003c\/strong\u003e for direct \u003cstrong\u003ePlug-and-play electrical connection with no loom modification required\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eNew galvanised steel lens dividers included\u003c\/li\u003e\n\u003cli\u003eWiring colours and functions are clearly documented on the rear of each LED board\u003c\/li\u003e\n\u003cli\u003eDedicated earth wires mount discreetly to the original lamp fixing studs\u003c\/li\u003e\n\u003cli\u003eNo drilling, cutting or permanent vehicle modification required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eClassic Mini Mk2 \/ Mk3 Saloon — 1967–1975\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSuitable for both Roundnose Mini saloons and Mini Clubman saloons fitted with the earlier rectangular rear lamp assemblies \u003cstrong\u003ewithout integrated reverse lights\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and uses the vehicle's original rear lamp units.\u003c\/p\u003e\n\u003cp\u003eRemove the original bulb contacts from the existing lamp assemblies and feed the new wiring through the original openings. The LED boards then slide into position within the lamp units.\u003c\/p\u003e\n\u003cp\u003eThe supplied galvanised steel lens dividers fit into the original lenses and clamp the LED boards securely into position once the lenses are refitted.\u003c\/p\u003e\n\u003cp\u003eEach board has its wiring colours and functions documented directly on the rear to make identification during installation straightforward.\u003c\/p\u003e\n\u003cp\u003eThe earth connection is designed to mount discreetly to one of the four original rear lamp fixing studs.\u003c\/p\u003e\n\u003cp\u003eThe Lucas connectors then connect directly to the vehicle's existing wiring loom, meaning \u003cstrong\u003eno cutting or alteration of the original loom is required\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation difficulty:\u003c\/strong\u003e ★☆☆☆☆\u003cbr\u003e\u003cstrong\u003eEstimated installation time:\u003c\/strong\u003e Approximately 30 minutes\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePair of LED rear light boards, pre-installed with Lucas connectors and earth terminals\u003c\/li\u003e\n\u003cli\u003ePair of new galvanised steel lens dividers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOriginal rear lamp housings and lenses are reused and are \u003cstrong\u003enot included\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eImportant Note\u003c\/h3\u003e\n\u003cp\u003eDepending on your vehicle's existing indicator system, fitting LED indicators may cause the indicators to flash at an incorrect rate.\u003c\/p\u003e\n\u003cp\u003eAn \u003cstrong\u003eLED-compatible indicator relay is available separately\u003c\/strong\u003e to provide the appropriate flashing interval where required.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIPNG Part Number:\u003c\/strong\u003e IP-0047\u003cbr\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e IPNG Automotive\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rear Light Conversion Kit\u003cbr\u003e\u003cstrong\u003eVehicle:\u003c\/strong\u003e Classic Mini Mk2 \/ Mk3 Saloon\u003cbr\u003e\u003cstrong\u003eFitment Years:\u003c\/strong\u003e 1967–1975\u003c\/p\u003e","brand":"IPNG Automotive","offers":[{"title":"Default Title","offer_id":58555989033295,"sku":"IP-0047","price":89.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/7729\/0063\/files\/ip-0047-classic-mini-led-rear-light-01_93e4d4cd-8ecf-468b-963c-a0dd7f3b5113.webp?v=1787700975","url":"https:\/\/ipng.store\/products\/classic-mini-mk2-mk3-led-rear-light-conversion-kit-1967-75-clubman-roundnose","provider":"IPNG Automotive","version":"1.0","type":"link"}